Days until EduCode 2014:
Session Descriptions
Classes start at 7:30 AM and/or 1:00 PM.
2009 International Building Code Update Session 1
This seminar introduces participants to the major changes from the 2006 IBC to the 2009 IBC with an emphasis of the changes contained in Chapters 1-11. The lecture and activity format allows participants to discuss the changes, reasons for the changes, and answer knowledge review questions. Information presented will allow participants to apply these new code requirements to design, plan review, and/or inspection.
2009 International Residential Code Update (Building) Session 2
This seminar introduces participants to the major changes from the 2006 IRC to the 2009 IRC with an emphasis of the changes contained in Chapters 1-10, 12-23, 25-32, and 43. Diagrams illustrate the changes. Knowledge Review questions are included that provide an opportunity for participants to apply the new codes. Information presented will allow participants to apply these new code requirements to design, plan review, and/or inspection.
Photovoltaic Systems Session 3
The topic of solar photovoltaic systems is rapidly evolving as the technology expands with the need for renewable energy sources. This seminar will focus on Article 690 of the National Electrical Code and requirements for designing inspecting and installing photovoltaic systems. This course will review photovoltaic systems from the array to the inverters including connection to the service, conductor selection, ampacity calculations, overcurrent protection and disconnect requirements.
2009 IFC and IBC Hazardous Materials Provision Session 4
The 2009 IFC and IBC Hazardous Materials Provisions seminar addresses requirements for buildings utilizing hazardous materials and requiring coordination between the fire and building codes. It reviews the requirements found in Chapters 27 through 44 of the International Fire Code (IFC), as well as Chapter 3, and Sections 414 and 415 of the International Building Code (IBC).
IRC Plan Review Session 5
Designed to provide a broad overview of the process for residential plan review, this one day course will provide the basic steps involved to complete a comprehensive review of a residence. The class will discuss the tools and process for conducting a residential plan review. It will also increase your awareness of the necessary items required to insure code compliance of the homes built in your jurisdiction.
Assessment of Alternate Methods and Material Session 6
Provides a solid background in the application of the alternates provisions contained in IBC Section 104.11. The first portion of the class will dissect the IBC to derive the base intent behind the prescription code requirements used to justify a 104.11 alternate assessment. The second portion of the class will look at sustainable alternative construction methods such as earth ship, straw bale, cob, cordwood, etc.
2012 International Green Construction Code (IGCC) Fundamentals Session 7
The 2012 International Green Construction Code (IGCC) Fundamentals seminar will provide an overview of the critical concepts of the 2012 IGCC. It will address the development of the IGCC, how it regulates to the other I-Codes, new construction, existing construction, multiple occupancy classifications and community development. This seminar will address the topic of energy efficiency and how the Code is integrated International Energy Conservation Code (IECC) and ASHRAE/USGBC/IESNA Standard 189.1P, Standard for the Design of High-performance Green Buildings.
Drain, Waste and Vent Provisions and Sizing Session 8
This seminar provides an overview of: sizing of drainage and vent systems, cleanouts, slope and change of direction of drainage flow, use of joints, drainage fixture units, installation and sizing of building sewers, sumps and sewage ejectors, indirect waste piping, chemical waste, steam and hot water drainage, condensers and sumps, vent terminations, island and combination waste venting. Further discussion will focus on the most common yet similar provisions in both codes that have caused confusion and errors during the process of plan review and inspections. Emphasis will be placed on the proper intent, interpretation, and application of the drain, waste and vent provisions of both codes.
2009 UPC Horizontal and Vertical Wet Venting Session 9
This session will discuss both horizontal and vertical wet venting and the requirements governing the installation of those systems. The discussion will also cover the proper functioning, use, and installation of these two venting options, providing a step by step guide to venting of the bath groups.
Introduction to Leadership and Transformational Leadership Session 10
Introduction to Leadership and Supervision reviews the key challenges and difference in needs when a person moves into a leadership position. Often described as the single most difficult career transition, the promotion to supervising, managing and leading others provides great opportunity to guide and direct others and move their performance through the application of your leadership skills. With the move to a leadership position, the expectations, responsibilities and relationships change dramatically.
Tone Setting, Morale and Motivation Session 11
The key to successful leadership is to win the minds, hearts and spirits of those being led. The Tone Setting, Morale and Motivation program attacks the primary principles of people centered leadership by providing the skills needed to have people want to work for you. The individual connection from leader to team and how that relates to motivation, satisfaction and production is the primary focus of this unit.
Inspecting Soils, Footings, Foundations and Concrete Slabs Session 12
This course provides an introduction to the inspection of soils, footings, foundations and concrete slabs for compliance with the 2009 IBC. It addresses the key points of inspection for each type of inspection as well as the overall process primarily for commercial construction.
Significant Changes to the ICC A 117.1 Accessibility Standard (2009 Edition) Session 13
Overview and in-depth coverage of the changes from the 2003 to the 2009 A117.1 Accessibility Standard. Identifies important changes in organization, accessibility standard requirements and the applicability of these requirements to design, plan review and inspection.
Compliance Connections/Safeguard Properties Session 14
This presentation will cover the following Safeguard Properties and Compliance Connection topics: General Mortgage Servicing Guidelines, Role of Property Preservation Companies in Communities, Initiatives, and New Solutions for Communication and Collaboration.
Home Occupations: The Residential Effect Session 15
Due to our national and individual states current economic crisis, there seems to be a trend that is appearing across America in an effort for citizens to maintain their economic status. That trend is Home Occupations. This course is designed to examine and discuss the changes of use and any possible solutions of the affects and effects of the continuing growth of Home Occupations in residentially zoned areas from a Code Enforcement Officer’s viewpoint without violating one’s constitutional rights.
2009 IRC Significant Changes Session 16
This seminar reviews and analyses selected significant changes from the 2006 IRC to the 2009 IRC. It familiarizes building officials, fire officials, plans examiners, inspectors and design professionals with many of the significant changes in the 2009 IRC. Assists code users in identifying the specific code changes that have occurred, and more importantly, understanding the reason behind the change. Focuses on those code changes selected due to their frequency of application, special significance or change in application.
IAEI NEC Analysis of Changes (2008 Edition) Session 17
This extensive and popular program analyzes the major changes to the NEC. Members of the nineteen NEC Code-making panels contributed to the development of the authoritative text, which covers core than 400 of the most significant changes and includes interpretations by the group that enforces the NEC. The four-color book the seminar is based upon is loaded with illustrations, photos, and text that clearly identify and explain the changes and their impact.
2009 IFC Flammable and Combustible Liquids Session 18
This course provides a basic understanding of the flammable and combustible liquids storage, use, dispensing, handling and mixing requirements in Chapter 34 of the International Fire Code® (IFC®) and NFPA 30, Flammable and Combustible Liquids Code. General fire code requirements for hazardous materials and specialized requirements for motor vehicle fuel-dispensing activities (IFC Chapter 22), dry cleaning (IFC Chapter 12) and other specialized uses of flammable and combustible liquids are not covered in detail due to the time limitations of a single-day course.
IBC Accessibility Overview Session 19
Overview of the scoping provisions for accessibility in the International Building Code and the technical provisions of the ICC/ANSI A117.1 Accessible and Usable Buildings and Facilities. The seminar will also discuss differences between the provisions enforced by building department and the American Disabilities Act Accessibility Guidelines.
Extreme Plan Review & Inspections Session 20
Addresses the very large and unusual building plan review and inspections. The class will focus on high-rise construction, atriums, very large buildings and unusual projects. The class will also discuss the special inspection process and how to monitor the program. The discussion will address the review and inspections of alternate designs and performance based design.
ACCA Manuals J, S and D and the 2009 IEC Session 21
This full day class is a must for contractors, design professionals and jurisdictional plans examiners. A full day session that will cover the ins and outs of the code standard stipulated in the IECC for calculation of HVAC equipment sizing for residential construction. A hands on class that will teach you how to maneuver through the calculation program and understand the results.
2009 UMC Refrigeration Provisions Session 22
This seminar provides an overview of the requirements associated with refrigeration systems, equipment and devices including; part replacement, alterations and substitutions of different refrigerants. Requirements for refrigeration machinery rooms and occupied spaces within refrigerated areas will be discussed. Discussion will focus on the provisions and process of plan review and inspections. Emphasis will be placed on the proper intent, interpretation, application and compliance of those processes to the 2009 UMC Chapter 11, Part I, ASHRAE 15 and IIAR 2 (Ammonia).
UMC GREEN Water Heating and Geothermal Systems Session 23
This seminar discusses the 2010 Green Plumbing and Mechanical Code Supplement provisions pertaining to water efficiency, conservation, and heating. Participants in this seminar will learn about the code and supplement regulations regarding the use and installation of fixtures and systems designed to efficiently use and conserve water, water heating design, equipment and proper installation. The provisions regarding geothermal system design, installation, and testing will be covered as well as the appropriate provisions that reference CSA C448.
Coaching Excellence — Providing Meaningful Feedback Session 24
Coaching skills are at the core of all good supervision, management and executive leadership. The nature of coaching in successful leadership is the engagement of team members and conducting a steady stream of performance enhancing communication. Effective leaders understand that coaching is at the core of the day-to-day operations and the most effective method of letting team members know how they are doing. Coaching is also the best and most effective method to build future talent for the organization.
Time Management and Organization Skills Session 25
Time Management and Organization Skills is a thorough look at the winning practices to save time and work and live more efficiently. The program focuses on ways to reduce Time Parasites through a set of strategies and tactics. This powerful portion of the program is guaranteed to save multiple hours per week when you execute the parasite reduction strategies.
2009 IRC Wood Wall Bracing Session 26
This seminar provides a comprehensive explanation of the 2009 International Residential Code (IRC) bracing requirements. It guides the participant through an in-depth review and analysis of the bracing requirements for woodframed residential structures. The seminar is designed to clarify the application of wall bracing provisions in the IRC wall bracing Section R602.10.
2009 IRC Fundamentals Building Provisions Session 27
Examines critical concepts of the building and energy provisions located in Chapters 1-11 of the 2009 IRC. It provides a basis for the correct use and application of the code and builds on an understanding of the intent of the code through practice with real-world examples.
Stop in the Name of the Law Session 28
This half day course is designed to assist the code enforcement officers in their daily inspections as they relate to constitutional laws. Code Enforcement Officers are spending more time in court being sued, not only by the customers they serve, but also civil suits being pursued by national and local organizations, leaving code officers wondering if they have absolute immunity by simply following the ordinances adopted by the county or municipality. The course will touch on the aspects of the law and why code officers continue to violate the law. In addition it will describe the penalties and costs associated with breaking the law.
“Zoning” - The Achilles Heel of Code Enforcement Session 29
This half day course is designed to identify and provide knowledge to code enforcement officers of their authority of policing powers throughout municipalities in relation to the comprehensive plan. The course will also place an emphasis on the code department/divisions acceptance in embracing and acknowledging zoning and the affect that it has on the growth of the department/division and the affect zoning has on a municipality’s economic development which ultimately leads to the quality of life standards.
2009 IFC Significant Changes Session 30
Familiarizes building officials, fire officials, plans examiners, inspectors and design professionals with many of the important changes in the 2009 International Fire Code. Assists code users in identifying the specific code changes that have occurred, and more importantly, understanding the reason behind the change. The course will review each of the code changes approved and provide examples of how these provisions are applied.
IAEI NEC Analysis of Changes (2011 Edition) Session 31
This extensive and popular program analyzes the major changes to the NEC. Members of the nineteen NEC Code-making panels contributed to the development of the authoritative text, which covers more than 400 of the most significant changes and includes interpretations by the group that enforces the NEC. The four-color book the seminar is based upon is loaded with illustrations, photos, and text that clearly identify and explain the changes and their impact.
NFPA 25 Inspection, Testing & Maintenance of Water-Based Fire Protection Systems Session 32
This seminar provides a comprehensive review of the 2011 edition of NFPA 25. This latest edition contains a number of significant changes regarding the scope of the standard, owner’s responsibilities, and frequency changes for some of the more significant inspection and tests. Attendees will learn the scope of the standard, the owner’s responsibilities, requirements for record keeping as well as the liabilities associated with performing this work on a contracted basis.
NFPA 25 Form Review of Sprinkler, Standpipes & Fire Pumps Session 33
This session will continue the lessons learned in the morning session with an in-depth review of the forms contained in NFPA 25 and record keeping requirements. Representatives from the local jurisdictions will be present to answer questions.
Commercial Building Inspections Session 34
This class provides commercial inspectors with improved techniques and an understanding of conducting building inspections of moderate to large size commercial buildings. The seminar will focus on the required and special inspections required by the 2009 International Building Code. The discussion will include inspections of concrete, masonry and steel construction. It will also include inspections of fire-resistance construction, means of egress and accessibility portions of the building.
IBC Building Areas, Fire Areas and Mixed Occupancies Session 35
This seminar provides a comprehensive discussion of the major compartmentalization concepts of the 2009 International Building Code, focusing on those requirements that deal with building size, sprinkler options and mixed-use buildings. Fire-resistance-rated construction is also addressed. This class will include topics on allowable areas, area increases, unlimited area buildings, fire area concept and construction, incidental/accessory use areas and separated/non-separated uses.
Compliance with the Residential Provisions of the 2009 IECC Session 36
Geared toward design professionals, contractors, tradesmen and code officials alike, this full day class will provide a complete understanding of the residential requirements of the 2009 IECC, including inspections and plans submittal requirements. IECC Commercial HVAC Requirements for Design Professionals and Plans Examiners.
Commercial Plumbing Inspection and Workshop Session 37
This seminar is a “how-to” discussion of plumbing inspections for commercial buildings. Attendees will be placed into groups and are given drawings of plumbing installations and asked to determine compliance. Participants will learn the fundamental steps and processes in performing plumbing inspections while also learning numerous tips, techniques, and potential pitfalls to avoid. For contractors, this class offers a great opportunity to learn what to expect when the inspector arrives on site.
Commercial Mechanical Inspections and Workshop Session 38
This seminar is a “how-to” discussion of mechanical inspections for commercial buildings. Attendees will be placed into groups and are given drawings of mechanical installations and asked to determine compliance. Participants will learn the fundamental steps and processes in performing mechanical inspections while also learning numerous tips, techniques, and potential pitfalls to avoid. For contractors, this class offers a great opportunity to learn what to expect when the inspector arrives on site.
Ethics, Integrity and Decision Making Session 39
Ethics, Integrity and Decision Making is an important program that will assist participants in understanding the complex and often confusing nature of ethical behavior at work. The primary focus is to develop and use skills to identify ethical dilemmas, provide guidance to the correct, and ethical course of action and a heightened sense of ethical values. This class satisfies the Quality Assurance Agency (QAA) education requirements for Clark County Development.
Interpersonal Communication Excellence Session 40
Communication is the transfer of data between individuals and groups. Interpersonal Communication Skills provides the tools, skills and resources to insure messages are properly sent and received. This foundational skill set is extremely important as a success factor in leadership, customer service and team dynamics. All facets of the communication equation are reviewed and improved in this program.
2009 IBC Significant Structural Changes Session 41
This course is a structural overview of the significant changes to the 2009 International Building Code (IBC) and referenced standards, including ASCE/SEI 7-05 + Supplement No. 2, ACI 318-08, ACI 530-08/ASCE 5-08/TMS 402-08, AISC 360-05 (combines ASD & LRFD into single unified steel design specification) and AF&PA NDS-2005 (now combines ASD & LRFD into single unified wood design specification). The course will also include the design requirements for determining snow, wind, and seismic loads which the 2009 IBC code refers to the load provisions in ASCE 7-05 exclusively.
2009 IBC Fire and Smoke Protection Features Session 42
This seminar addresses the critical concepts of the 2009 IBC regarding Chapter 7, Fire and Smoke Protection Features. These concepts provide a basis for the analysis and identification of which components require fire-resistance ratings; where the fire-resistance-rated construction is required in building construction; where smoke-resistant construction is mandated; and the use of fire door assemblies, fire window assemblies, penetration firestop systems, fire dampers and smoke dampers.
Developing Effective Standard Operating Procedures (SOP) Session 43
This class provides you the why, who, what, and how of effective Standard Operating Procedures (SOP). Students will learn the importance of effective SOPs for a Code Enforcement Department. Students will learn and practice the tasks necessary to develop and write effective SOPs in the classroom. The class will explain why effective SOPs are necessary, when SOPs are necessary and what steps must be taken to develop an effective SOP.
Administering the 2009 IPMC, Chapter 1 Session 44
This class provides guidance on administering the 2009 IPMC and comprehensive discussion of Chapter 1 “Scope & Application”. The class is setup for all levels of staff in code enforcement, from inspector to Code Official. Topics will include adopting a new code for your jurisdiction, including amendments, wording of code and intent, applying the codes in various situations and the functions of the Code Enforcement Department.
2009 IBC Significant Changes Session 45
Familiarizes building officials, fire officials, plans examiners, inspectors and design professionals with many of the important changes in the 2009 International Building Code . Assists code users in identifying the specific code changes that have occurred, and more importantly, understanding the reason behind the change. Focuses on those code changes selected due to their frequency of application, special significance or change in application. Discusses over 120 changes, with a major emphasis on those provisions addressing fire and life safety.
One and Two-Family Dwelling Electrical Systems Session 46
This comprehensive seminar explains installation, design, and inspection of electrical systems in new and existing one- and two-family dwellings in clear, concise language, with numerous pictures and graphics. This seminar is based on IAEI’s book entitled One- and Two-Family Dwelling Electrical Systems, 7th edition, that includes the electrical requirements of both the National Electrical Code (NEC) and the International Residential Code (IRC). This presentation is particularly helpful and valuable for inspectors, contractors, electricians, and students in making more accurate, thorough, and safer installations and inspections. This seminar will also explain calculating loads for electric vehicle charging equipment.
NFPA 13: Technical Changes from 2007 to the 2010 Edition Session 47
Familiarizes building officials, fire officials, plans examiners, inspectors, contractors and design professionals with many of the important changes in the 2010 NFPA 13 standard. Assists code users in identifying the specific changes that have occurred, and more importantly, understanding the reason behind the change. The course will review each of the changes in the NFPA 13 standard and provide examples of how these changes are applied.
IBC Existing Buildings Session 48
This seminar addresses the relationship of Chapter 34 of the 2009 International Building Code to existing buildings. The seminar focuses on the fundamental requirements on an existing structure that undergoes repair work, alteration, renovation activity or construction of an addition, and the effect of a change in the building’s occupancy classification. Discussion will also include the “Performance Compliance Alternatives” method of evaluating a building.
Advanced Means of Egress Session 49
An advanced look at the means of egress requirements included in Chapter 10 of the International Building Code. The presentation will include detailed discussions on the design and review of the means of egress in unusual occu- pancies. Subjects included in the class are malls, assembly occupancies, special egress components, smoke proof enclosures, horizontal exits and exit passageways. Practical examples will be used to illustrate code requirements. This class is designed for those students that have a basic understanding of how the means of egress is designed and reviewed.
Compliance with Commercial Provisions of the 2009 IECC Session 50
Design professionals, contractors and code officials alike will find this full day class a must for understanding the commercial requirements of the 2009 IECC, covering building envelope, window, HVAC, service water heating and electrical lighting/day lighting sections of the code.
UL Fire Stopping in Fire-Resistance Rated Assemblies Session 51
Plumbing and mechanical systems are often required to pass through fire-resistive floor or wall assemblies, while maintaining the fire-resistive rating for those assemblies. Through penetration firestop systems are intended to maintain the hourly rating of fire-resistive assemblies that have been breached due to penetration by plumbing or mechanical items. This session will discuss the various materials, systems, and methods tested and approved by Underwriters Labs to maintain fire-resistive ratings.
ADAAG/ANSI 117.1 Plumbing Accessibility Requirements Session 52
This session will discuss the provisions, differences, applications, design issues, code and supplement regulations as defined in the Americans with Disabilities Act Accessibility Guidelines (ADAAG) and the current federal regulations now included in the ICC International Building Code and the latest revisions to the ICC/ANSIA117.1-2009 Standard for Accessible and Usable Buildings and Facilities as they pertain to plumbing applications.
Presentation and Public Speaking Excellence Session 53
Presentation Skills and Public Speaking will tackle the common myths and fears associated with public speaking, and emphasize the importance of the ability to communicate effectively to all types of audiences. The program will examine and provide the critical skills associated with successful presentations including voice quality, content management, non-verbal signals, overcoming fears and understanding the needs of your audience. We will also provide practical techniques that individuals can utilize in their daily communications to deliver more effective presentations.
Written Communication Excellence Session 54
We are often judged based on how well we write and convert communication into written form. Email, letters, memos and other documents will come alive and project a successful image with this program. Written Communication Skills is an important set of workplace and success tools designed to make all written documents, even electronically transmitted ones, simple, powerful and accurate reflections of you and your organization.
IBC Concrete Quality and Field Practices Session 55
This course discusses the construction and inspection applications of the International Building Code® (IBC®) and referenced standard for concrete design and construction, ACI 318-08, Building Code Requirements for Structural Concrete. For quality and testing of materials used in concrete construction, the appropriate, American Society for Testing and Materials (ASTM) standard specifications are referenced directly. The program emphasizes proper field procedures and inspection practices for quality structural concrete. The materials presented in this seminar are designed to assist participants in determining acceptable or unacceptable construction applications for concrete and components from the 2009 IBC and the referenced standards.
2009 IBC Concepts of Designing Wood Structures Session 56
This seminar examines wood design procedures and purpose, based on the International Building Code® (IBC®), the National Design Specification (NDS®), and the Special Design Provisions for Wind and Seismic® (SDPWS®). The seminar addresses load development, beam, column, and connection design, and gives an introduction to lateral design. The seminar also gives an overview of basic engineering concepts.
The Art of Leadership — Part 1 Session 57
In the Art of Leadership Workshops, Part 1 and 2, You Will Learn How To: Inspire teamwork, commitment and cooperation with your staff! Sessions are taught using building block modules for easy understanding and application of learning methods and techniques. This is a real world leadership program that can help managers and experienced leaders, as well as up-and-coming leaders. We will supply you with the leadership skills and communications tips and tools to get started.
The Art of Leadership — Part 2 Session 58
This class is a continuation of the morning session described above.
2009 International Residential Code Update (Building) Session 59
This seminar introduces participants to the major changes from the 2006 IRC to the 2009 IRC with an emphasis of the changes contained in Chapters 1-10, 12-23, 25-32, and 43. Diagrams illustrate the changes. Knowledge Review questions are included that provide an opportunity for participants to apply the new codes. Information presented will allow participants to apply these new code requirements to design, plan review, and/or inspection.
2009 International Building Code Update Session 60
This seminar introduces participants to the major changes from the 2006 IBC to the 2009 IBC with an emphasis of the changes contained in Chapters 1-11. The lecture and activity format allows participants to discuss the changes, reasons for the changes, and answer knowledge review questions. Information presented will allow participants to apply these new code requirements to design, plan review, and/or inspection.
Conductor Installation Session 61
This seminar (based on the 2011 NEC) is designed to explain the ampacity and conditions of use for various conductors used in the electrical industry. Different conditions involving conductor terminations such as temperatures, number of conductors in a raceway, continuous loads, and all play a part in determining the correct conductor for a particular installation. Basic principles to determine conductor ampacities are covered in detail. Principles presented are selection of conductors using the Allowable Ampacity Tables by calculation, ampacity correction factors for high ambient temperatures and for excessive conductors, rules on termination temperatures, conductors supplying a continuous load, equipment manufacturer’s installation instructions, and selecting conductors for environmental conditions.
Motors Session 62
Requirements for motors are often misunderstood and misapplied in the electrical industry. This seminar is a must for installers and inspectors alike or anyone who needs to enhance their general understanding of motor rules found in the NEC and how to apply these rules in everyday situations. Based on the 2011 edition of the NEC.
NFPA 20: Installation of Stationary Fire Pumps for Fire Protection Session 63
This seminar provides an overview of the requirements for the design and installation of fire pumps including the major revisions from the 2007 edition. Special attention will be given to acceptance testing and the inspection, testing and maintenance of existing pumps.
NFPA 14: Installation of Standpipe and Hose Systems Session 64
Upon completion of this seminar the attendee should be able to describe differences between manual and automatic standpipes, identify conditions in a non-high rise building when a standpipe may be designed without the use of a fire pump; determine protection from freezing or seismic events and understand the floor control assembly for a combined standpipe.
IBC Fire Resistant Rated Construction Session 65
In-depth discussion of the fire-resistant-rated construction, Chapter 7 and 8, and fire protection, Chapter 9, provisions of the 2009 IBC. The class will include a discussion of available resources available to comply with these chapters. The class also includes discussion of where fire protection systems are required to be installed. The installation standards for fire protection systems will not be discussed in this class.
Tenant Improvement Aspects of A, B & M Occupancies Session 66
Identifies IBC provisions applicable to the design and construction of tenant space improvements. The discussion addresses the three most common types of uses: business, mercantile and assembly. It emphasizes options available in the code for gaining compliance. Discussion includes occupancy separations and fire areas, type of construction features, fire-resistance-rated construction, interior finish materials, fire protection features, means of egress components and means of egress design.
Continued Use and Re-Use of Existing Buildings Session 67
Addresses the relationship of the IBC to existing buildings, as well as the use of the IEBC. Focuses on the fundamental requirements of IBC Chapter 34 that are placed on an existing structure that undergoes repair work, alteration, renovation activity or construction of an addition, and the effect of a change in the building’s occupancy classification. Discusses the “compliance alternatives” method of Section 3409. Topics include regulations of additions, alterations and repairs, changes of occupancy considerations, compliance alternatives and application of the IEBC.
Comparison Between 2007 ASHRAE 90.1 & the 2009 IECC & HVAC Requirements Session 68
Design Topics I for the 2009 IECC is a nuts and bolts class, discussing design options for compliance with energy code requirements. The differences between the 2007 ASHRAE 90.1 and the 2009 IECC approaches to design will be discussed in detail. The second part to the class will provide contractors, designers and plans examiners alike, a working understanding of the complicated HVAC provisions of the code, including an explanation of various complex HVAC systems, how they work and what controls are now required for each type to insure compliance with the code.
Commercial Lighting Requirements of the 2009 IECC Session 69
Geared toward design professional and plans examiners, Design Topic II is a continuation of the morning ses- sion, with the lighting and day lighting topics first up. Understanding options in meeting the lighting controls and budgeting requirements will be covered in detail. The final topic is a must for all contractors, design professionals and code officials and will cover how DOE’s COMcheck compliance software works and how it should be best used insuring energy code compliance.
Plumbing Alternatives — Mini Sessions Session 70
This presentation will discuss three topics: 1) The alternate sizing methodology for water piping; 2) Alternative gas piping systems and; 3) Fat, oil and grease (FOG) systems. Participants will utilize Appendix L of the 2009 UPC, the basics of the gas pipe sizing provisions, properties of natural gas, gas pipe sizing methods for black steel systems, copper tubing systems, and CSST systems. The class will also discuss the provisions regulating FOG disposal systems, with the major focus placed on the significant code changes impacting FOG systems, equipment and sizing.
Mechanical Alternatives — Mini Sessions Session 71
This class will discuss four topics: 1) The provisions of the 2009 UMC Part II Kitchen Hoods; 2) Type I and II Clothes Dryers and Exhaust ducts; 3) Fuel burning appliances located in bedrooms and; 4) Converting wood burning fireplaces to gas. This class will assist participants to understand the options available for design of kitchen hoods, grease ducts, Type 1 & 2 clothes dryers and their exhaust ducts, the new UMC requirements and potential haz- ards of fuel burning appliances installed in sleeping areas and the UMC provisions that are applicable to the conversion of wood burning fireplaces to gas fireplaces.
Emotional Intelligence – Self Management and Understanding Session 72
No one is really able to manage and lead others unless they are able to manage themselves. The Self Management program utilizes the personal half of emotional intelligence to build the skills needed to correctly manage actions, words, demeanor, attitude and image. The importance of a person’s example and that impact on others is the primary focus of this unit.
Ten Lessons We Learn from Dogs Session 73
The Ten Lessons We Learn from Dogs is an insightful, fun, interactive and amazingly powerful view of skills we can learn from man’s best friend. Dogs are incredible creatures with an outstanding outlook that can teach us a great deal.
Masonry Quality and Field Practices Session 74
This full day seminar addresses and provides the fundamentals of quality structural masonry construction and pro-vides a working knowledge of the basics of masonry inspections. The session is tailored for individuals who are associated with structural masonry construction inspections. The subjects addressed in the session are found in the construction requirements of 2009 International Building Code and in the various reference standards that regulate masonry materials and construction.
2009 IBC Fundamentals Non-Structural Provisions Session 75
This seminar focuses on the basic nonstructural concepts of the 2009 International Building Code® (IBC®). These concepts provide a basis for the correct utilization of the code. A clear understanding of the identified requirements allows the code user to apply the IBC in specific situations and helps to build an understanding of the intent of the code when asked to make a judgment on code compliance. This course will also help the code user to correctly locate and recognize the interrelatedness of code requirements, as well as to begin to develop a procedure for applying them. It will address the organization of the code and the interrelation of the IBC with the family of International Codes® (I- Codes®).
Apartment Inspection Program — Code Enforcement Sweeps Session 76
The goal of these two programs is to inspect all Apartment Complexes within the City limits to ensure compliance with all of the codes and ordinances of the municipality and protect the health, safety and welfare of the citizens. The course will focus on the tools used to obtain compliance, and the outcome of a strategic effort to address issues associated with multifamily dwellings.
Courtroom Procedures for Code Enforcement Officers Session 77
This class introduces practices and guidelines for code enforcement officers when appearing in front of enforcement boards, Judges or other adjudicating bodies. The theories and guidelines presented during this session are intended to acquaint officers with common issues associated with courtroom procedure. A case study, as well industry best practices will be discussed with a concentration on how certain practices and procedures vary from county to county, state to state, and judge to judge.
The name EduCode and its blueprint logo are service marked to the Southern Nevada Chapter - International Code Council, Las Vegas NV. Other trade association and company names, logos, related marks, images and symbols are exclusive properties, trademarks or registered trademarks of their respective owners and are used by permission of their owners. All Rights Reserved.